Insulating safety analysis of the hot-line sweeping robot

This paper presents a method of calculating the insulating safety distances for hot-line working robots at high voltage when dielectric is adulterated with conducts. Also, finite element method is adopted to calculate the electric field strength to find whether it is beyond the critical. The above methods have been applied to analyze the insulating safety of the robot for hot-line sweeping post insulators in a 220 KV substation. They have also been testified by experimentations.     

高压电动机定子线圈匝间绝缘问题的探讨

在实践经验的基础上，分析了我国匝间绝缘短路的主要原因，提出在匝间绝缘的设计，制造工艺及耐压试验等工序采取合理措施，以提高匝间绝缘的可靠性。     

An investigation of induced voltages to an underground gas pipeline from an overhead transmission line

This paper investigates induced voltage characteristics from an overhead transmission line by applying a method of modeling of induced voltages proposed by the authors. EMTP simulation results obtained by the modeling method agree with analytical results obtained from a well‐known formula. The induced voltages are significantly dependent on the configuration of the overhead line. A horizontal line induces the largest voltage in a gas pipeline, and the voltage induced by a vertical twin‐circuit line is about 20% smaller than that induced by a vertical single‐circuit line. The method is applied to a real pipeline system and the simulation results show reasonable agreement with field test results. © 2008 Wiley Periodicals, Inc. Electr Eng Jpn, 164(1): 43–51, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20465     

凸轮逆序测量方法

目前各杂志所发表的关于凸轮测量的文章，所讨论的均是凸轮的顺序测量方法，有关凸轮的逆序测量(反求工程)方法，尚未见于文字。本文将对凸轮的逆序测量方法进行探讨。     

陆相断陷湖盆中层序边界的形成机理及其识别特征研究

陆相断陷湖盆中层序边界是由于沉积物表面高出沉积基准面或盆地基准面、沉积物发生剥蚀或无沉积作用所形成的，其产生机理主要有边界断层停止活动、断块翘倾活动、湖盆整体抬升和湖平面下降。层序边界在地震特征上、测井曲线上、钻井剖面中的岩性、岩相特征、古生物组合、微量元素的变化上均有明显的特征。利用这些特征，在济阳坳陷下第三系中识别出9个三级层序。     

《华东电网500 kV变压器全过程管理技术规范>的实施要点

介绍了在执行《华东电网 5 0 0 k V变压器全过程管理技术规范》过程中 ,应强调管理是从基建到生产 ,从选型、安装到运行维护的全过程管理 ,重点介绍了变压器在订货过程中应高度重视诸如对于选用非强油循环的冷却方式、三相共体变压器、抗短路能力以及过励磁问题 ,也对变压器安装过程中水分控制、运行中气相色谱分析和局部放电试验要求作了简述     

变频调速器在桥式抓斗吊车中的应用

论文主要介绍了电机的调速方法、变频器的工作原理以及日本FRNIC500G7型变频器在桥式抓斗吊车上的应用，并分析了使用绕线式电机调速与鼠笼式电机变频调速之间的优缺点。     

Chrestenson函数序列的生成方法及其数学分析

本文提出了适于三种序号的Ｃｈｒｅｓｔｅｎｓｏｎ函数序列的复制方法，对其复制过程进行了数学分析，并指出当Ｃｈｒｅｓｔｅｎｓｏｎ函数退化为Ｗａｌｓｈ函数时，此方法即为复制理论中的平移复制方法。     

A Standard Model-Theoretic Approach to Operational Semantics of Recursive Programs

In this paper we try to introduce a new approach to operational semantics of recursive programsby using ideas in the“priority method”which is a fundamental tool in Recursion Theory.In lieu ofmodelling partial functions by introducing undefined values in a traditional approach,we shall define apriority derivation tree for every term,and by respecting the rule“attacking the subterm of thehighest priority first”we define transition relations,computation sequences etc.directly based on astandard interpretation which includes no undefined value in its domain.Finally,we prove that ournew approach generates the same operational semantics as the traditional one.It is also pointed outthat we can use our strategy to refute a claim of Loeckx and Sieber that the opperational semanticsof recursive programs cannot be built based on predicate logic.     

PFC控制技术的一种改进方案

文章首先指出了目前ＰＦＣ所用控制技术的缺陷，然后提出了一各改进方案，并从理论分析和仿真验证的角度证明了改进方案的可行性和先进性。